Fiberoptic Stripper – CFS-3
Features
- The three unique fiber-coating stripping pliers
- For stripping 125μm 250μm fiber coating
- 1.98mm top opening can be used to peel off the outer sheath pigtail
- V-shaped mouth edge of the clamp opening and 140μm on the optical fiber can be used for stripping 125μm 250μm cladding
- Manufacturer default goes without adjustment
- Will not damage the fiber
- All cutting surfaces have sophisticated mechanical tolerances to ensure a clean, smooth operation Ergonomically designed handle, comfortable grip • When not in use, the blade locked in the closed state
Related products
- Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – techNXT Gold
Features
• Portable Style With Perfect Shape.
• It Won’t damage the shelled-wire and works with high efficiency.
• The Mouth of the press-pliers is made of magnanic steel, which is hard and durable.
• While using press-pliers, just insert the cystal top into its position and press it.
• For 4,6,8 poies mudular connector.SKU: n/a - Accessories, Connecter
Fast Connector SC/PC/APC
Norden fast connectors are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. These fast connectors are compatible with 0.9mm tight buffer,2mm & 3mm drop cable. This connector during the installation process does not require any adhesive and curing process. It is possible to rework, so can be reduced the defect rate by worker’s connection error.
FEATURES
- Easy Assembly Process
- No Polish, No Epoxy Required
- Factory Polishing Eliminates Loss Concerns
SKU: n/a - Accessories, Stripper, Crimping Tool & Cutter
Fiberoptic Stripper – CFS-2
Features
- Fiberoptic Stripper features precise two stripping holes perform all common fiber stripping functions and guarantee accurate stripping without damage.
- Strips the 1.6-3.0mm fiber jacket down to the 600-900 micron buffer coating.
- Strips the 600-900 micron buffer coating down to the 250-micron coating.
- Strips the 50-micron cable down to the glass fiber without nicks or scratches.
- For Stripping 125 Micron fiber with 250-micron buffer coating.
SKU: n/a - Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – TnT-5000
Features
- Cutting Modular Cable:- Place the single-bladed side of the tools cutter facing you and cut the modular cable to the desired legth. Make sure to cut the ends of the cord straight across, not diagonally.
- Stripping modular cable (Flat Cable):- 2a. Insert 4P/6P cable into the two-bladed side of the tool’s stripper unti it touches the stop guide.
- Insert 8P/cable into the two-bladed side of the tool’s stripper and let it extend a little past the lower cut blade.
- Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.
Stripping Round Cable - Insert the cable into the round stripping hole, and turn the crimper in a counter-clockwise direction and the cable clockwise at the same time.
- Remove the outer jacket, insert the stripped cable into the plug, and be sure the left wire at one end matches the right wire at the other end.
- Place a modular plug with cable into the tools holder. Be sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.
- The 4P holder is located on the back side of the tool.
SKU: n/a
