




Featured Products
- Xpon
TnT-999DMW-GEXPON
0 out of 5(0)XPON 1GE+WiFi Router ONUis support XPON. It can also be applied to a wide-temperature environment and has a powerful firewall function.
XPON 1GE+WiFi Router ONU meetstelecom operators FTTO (office), FTTD (Desk). FTTH (Home) broadband speed, SOHO broadband access, video surveillance, and other requirements and design XPON Gigabit Ethernet products. The box is based on the mature Gigabit XPON technology, highly reliable and easy to maintain, with guaranteed QOS for different services. And it is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
SKU: n/a₹1,520.00 - Xpon
1*XPON+2GE+WiFi5 ONT – TnT-802DAC
0 out of 5(0)FEATURES
TnT-802DAC (2GE+WiFi5 XPON ONT) is designed to meet the FTTH requirements of fixed network operators. The ONT is based on a high-performance chipset (Realtek) technology solution, supporting IEEE802.11b/g/n/ac WIFI technology and other Layer 2/Layer 3 functions. The ONT supports the OAM/OMCI protocol, and we can configure or manage various services of the ONT on the VSOL OLT.
The ONU has high reliability and is easy to manage and maintain. It has QoS guarantees for different services. It complies with the China Telecom CTC2.1/3.0 and international technical standards such as IEEE802.3ah, ITU-T G.984, etc.SKU: n/a - Xpon
1GE+1FE +1 POTS + WIFI – TnT-323 RGW-GEXPON
0 out of 5(0)TNT-323RGW (GEXPON 1GE+1FE+WiFi 4 HGU ONT) is a broadband access device specially designed to meet the needs of telecom operators for FTTO (Office), FTTD (Desktop), FTTH (Home), SOHO access, and video surveillance access.
The ONT is based on high-performance chip solutions, supports XPON dual-mode technology (EPON and GPON), and also supports IEEE802.11b/g/n WiFi 4 technology and other Layer 2/Layer 3 functions, providing data service for carrier-grade FTTH applications. In addition, the ONT also supports the OAM/OMCI protocol, and we can configure or manage various services of the ONT on the GPON/EPON OLT.
The ONT has high reliability, is easy to manage and maintain, and has QoS guarantees for various services. It conforms to a series of international technical standards such as IEEE802.3ah and ITU-T G.984.SKU: n/a₹1,475.00 - Xpon
1GE+1FE +1 POTS + WIFI – TnT-323 RGWC-GEXPON
0 out of 5(0)TNT-323 RGW (XPON 1GE+1FE+WiFi 4 HGU ONT) is a broadband access device specially designed to meet the needs of telecom
operators for FTTO (Office), FTTD (Desktop), FTTH (Home), SOHO access, and video surveillance access.
The ONT is based on high-performance chip solutions, supports XPON dual-mode technology (EPON and GPON), and also
supports IEEE802.11b/g/n WiFi 4 technology and other Layer 2/Layer 3 functions, providing data service for carrier-grade FTTH
applications. In addition, the ONT also supports the OAM/OMCI protocol, and we can configure or manage various services of the
ONT on the VSOL OLT.SKU: n/a - Xpon
1GE+1POTS+WiFi – TnT-322DAC-XPON
0 out of 5(0)FEATURES
TNT-322 RGW (XPON 1GE+WiFi 4 HGU ONT) is a broadband access device specially designed to meet the needs of telecom
operators for FTTO (Office), FTTD (Desktop), FTTH (Home), SOHO access, and video surveillance access.
The ONT is based on high-performance chip solutions, supports XPON dual-mode technology (EPON and GPON), and also
supports IEEE802.11b/g/n WiFi 4 technology and other Layer 2/Layer 3 functions, providing data service for carrier-grade FTTH
applications. In addition, the ONT also supports the OAM/OMCI protocol, and we can configure or manage various services of the
ONT on the VSOL OLTSKU: n/a - Xpon
2GE+1POTS+WiFi – TnT-323DAC-XPON
0 out of 5(0)FEATURES
TNT-323DAC (2GE+1POTS+ WiFi5 XPON HGU ONT) is a broadband access device specially designed to meet the needs of fixed network operators for FTTH and triple play services.
The ONT is based on high-performance chip solutions, supports XPON dual-mode technology (EPON and GPON), and also supports IEEE802.11b/g/n/ac WiFi technology and other Layer 2/Layer 3 functions, providing data service for carrier-grade FTTH applications. In addition, the ONT also supports the OAM/OMCI protocol, and we can configure or manage various services of the ONT on the VSOL OLT.SKU: n/a₹2,710.00
- Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – Zylys
0 out of 5(0)Features
- Portable Style With Perfect Shape.
- It Won’t damage the shelled-wire and works with high efficiency.
- The Mouth of the press-pliers is made of magnanic steel, which is hard and durable.
- While using press-pliers, just insert the cystal top into its position and press it.
- For 4,6,8 poies mudular connector Plastic Construction
SKU: n/a - 1G SFP Transceivers, Optical Transceivers, PON & SFP Module
1.25 GBPS SM SF 20 km LC BIDI SFP Transceiver 1310/1490
1G SFP Transceivers, Optical Transceivers, PON & SFP Module1.25 GBPS SM SF 20 km LC BIDI SFP Transceiver 1310/1490
0 out of 5(0)FEATURES
- Up to 1.25Gb/s Data Links
- Hot-Pluggable
- Single LC connector
- Up to 20 km on 9/125μm SMF
- 1310nm FP laser transmier
- 1490nm PIN photo-detector
- Single +3.3V Power Supply
- Monitoring Interface Compliant with SFF-8472
- Maximum Power <1W
- Industrial /Extended/ Commercial operating temperature range: -40°C to 85°C/-5°C to 85°C/-0°C to 70°C Version available
- RoHS-compliant and Lead Free
SKU: n/a - 10G SFP Transceivers, Optical Transceivers, PON & SFP Module
10 GBPS bidi SM SF 1330nm/ 1270nm 60 KM LC DDM
10G SFP Transceivers, Optical Transceivers, PON & SFP Module10 GBPS bidi SM SF 1330nm/ 1270nm 60 KM LC DDM
0 out of 5(0)FEATURES
- Supports 9.95Gb/s to 11.3Gb/s bit rates
- Hot-pluggable SFP+ footprint
- Single LC for Bi-directional Transmission
- Maximum link length of 60km
- Built-in 1330/1270 WDM Filter
- Uncooled 1330nm or 1270nm CWDM DFB Laser.
- Power dissipation <1.5W
- No Reference Clock is required
- Built-in digital diagnostic functions
- Temperature range 0°C to 70°C
- Very low EMI and excellent ESD protection
- RoHS Compliant Part
SKU: n/a - Distribution Products, Outer Box
outer box 16/24 core ( FDB )
0 out of 5(0)Features
- 16/24 Core ( Size 30*28*10 cm )
- 2 fiber optic cable ports with 16 pcs drop fiber cable port for fiber optic splitter or pigtails assembly
- Made of Premium Grade Flame Resistant Material
- Suitable to SC FC LC Fiber Adapters & Pigtails for Outdoor use
- Reasonable Bending Radius for Fiber Protection
- Easy to open and safe in protection in Outdoor Environment
SKU: n/a₹1,062.00 - OTDR, Splicing
OTDR TNT333-120 KM
0 out of 5(0)FEATURES
- 5.6-Inch out door-enhanced touchscreen, 7.4V/4.4Ah Lithium battery
- Event Dead zone as lower as 1.5 meter
- Combined multi-dynamic range and wavelengths
- Multi measurement mode, support Touching LCD and pressing keys
- Warning function could prevent OTDR module from being damaged by optical signal in fiber.
- Realtime measuring function, convenient to monitor the splicing process
- Integrated 10mw Visual Fault Locator
- Support English/ Chinese input, adopts friendly input interface, totally simulate the computer keyboard input
- Integrated with 8GB internal memory, more than 80,000 groups curve storage
- PC remote access and control function is available, which support the printing work of the measurement report
SKU: n/a - GEPON OLTs
OLT 8 port GEPON – TnT-E3008-L3
0 out of 5(0)TnT-E30xxseries EPON OLT products are 1U height 19 inch rack mount products. The features of the OLT are small, convenient, flexible, easy to deploy, high performance. It is appropriate to be deployed in compact room environment. The OLTs can be used for “Triple-Play”, VPN, IP Camera, Enterprise LAN and ICT applications.
FEATURES
- Support C/S & B/S architecture
- Support auto topology or modify manually
- Add Trap Server to detect ONU automatically
- EMS can add and configure ONU automatically
- Add ONU position information
- Support EMS APP
SKU: n/a - 1G SFP Transceivers, Optical Transceivers, PON & SFP Module
1.25 GBPS SM SF 40 km SC BIDI SFP Transceiver 1310/1550
1G SFP Transceivers, Optical Transceivers, PON & SFP Module1.25 GBPS SM SF 40 km SC BIDI SFP Transceiver 1310/1550
0 out of 5(0)FEATURES
- Up to 1.25Gb/s Data Links
- Hot-Pluggable
- Single LC connector
- Up to 40 km on 9/125μm SMF
- 1310nm DFB laser transmier
- 1550nm PIN photo-detector
- Single +3.3V Power Supply
- Monitoring Interface Compliant with SFF-8472
- Maximum Power <1W
- Industrial /Extended/ Commercial operang temperature range: -40°C to 85°C/-5°C to 85°C/-0°C to 70°C Version available
- RoHS-compliant and Lead-Free
SKU: n/a
- Accessories, Optical Adapter
Adopters & Attenuators
0 out of 5(0)All Kinds of Adopters & Attenuator Available
Adopters Sc-Apc Green Adopters Sc-pc Blue Adopters Fc Adopters LC Doble Adopters Lc Quatera Adopters lc Dual Multimode Adopters lc single Adopters LC APC dual-mode Adopters LC Aqua color Adopters LC dual Aqua color Adopters SC-FC METAL Adopters SC-FC Plastic Adapter SC MM dual Adopters ST Adopters SC-LC Metal SKU: n/a - Accessories
10 DAC Cable 3 mtr
0 out of 5(0)Features
- 10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing.
- Widely compatible with Cisco, Ubiquiti, D-link, Supermicro, Netgear, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, Open Switch, etc devices.
- Attach Copper Cable, Customized sevice also is available.
SKU: n/a₹1,770.00 - Accessories
100 G DAC cable 5 mtr
0 out of 5(0)Features
- 10G SFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing.
- Widely compatible with Cisco, Ubiquiti, D-link, Supermicro, Netgear, Mikrotik, ZTE, Quanta, Solarflare, PaloAlto, F5, Open Switch, etc devices.
- Attach Copper Cable, Customized sevice also is available.
SKU: n/a₹7,670.00 - Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – Pro’sKit Leo
0 out of 5(0)Features
- Multi-Function Telephone Tool Crimps, Cuts, and Strips For Easy On-The-Job Tool Application.
- The Steel Frame Gives Long-Term Durability and Dependability.
- Provides Easier and Faster Operation.
- For RJ-45/11 Modular Connector Steel Frame.
SKU: n/a₹483.00 - Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – techNXT Gold
0 out of 5(0)Features
• Portable Style With Perfect Shape.
• It Won’t damage the shelled-wire and works with high efficiency.
• The Mouth of the press-pliers is made of magnanic steel, which is hard and durable.
• While using press-pliers, just insert the cystal top into its position and press it.
• For 4,6,8 poies mudular connector.SKU: n/a - Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – TN-021C
0 out of 5(0)Features
- FOR COND 8P8C LISE techNXT
- Cut the modular cable to the desired length. Make certain that the end are cut squarely, not diagonally.
- Insert flat cable between stripper blades. Squeeze handles, cable must be keep perpendicular and then pull from the tool.
- Stripping Round Cable
- Insert the cable into the round stripping hole and then turn the cable.
- Remove the outer jacket, insert the stripped cable into the plug and be sute the left wire at one and
matches the right wire at the other end. - Place modular plug with cable into the tools holder. Make sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.
SKU: n/a - Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – TnT-5000
0 out of 5(0)Features
- Cutting Modular Cable:- Place the single-bladed side of the tools cutter facing you and cut the modular cable to the desired legth. Make sure to cut the ends of the cord straight across, not diagonally.
- Stripping modular cable (Flat Cable):- 2a. Insert 4P/6P cable into the two-bladed side of the tool’s stripper unti it touches the stop guide.
- Insert 8P/cable into the two-bladed side of the tool’s stripper and let it extend a little past the lower cut blade.
- Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.
Stripping Round Cable - Insert the cable into the round stripping hole, and turn the crimper in a counter-clockwise direction and the cable clockwise at the same time.
- Remove the outer jacket, insert the stripped cable into the plug, and be sure the left wire at one end matches the right wire at the other end.
- Place a modular plug with cable into the tools holder. Be sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.
- The 4P holder is located on the back side of the tool.
SKU: n/a
Products Grid
- Best Deals
- Optical Fiber Identifier
- LIU
- PIGTAIL
- Ratio Couplers
- Patch Cord
- Visual Fault Locater
- Android TV Box
- Switches
- Switches
CloudEngine S6730-H48x6C
0 out of 5(0)Product Overview
CloudEngine S6730-H series switches are next-generation enterprise-class core and aggregation switches that offer high performance, high reliability, cloud management, and intelligent operations and maintenance (O&M). They build on an industry-leading Versatile Routing Platform (VRP) and are purpose-built with security, IoT, and cloud in mind. With these traits, CloudEngine S6730-H can be widely used in enterprise campuses, colleges/universities, data centers, and other scenarios.CloudEngine S6730-H switches offer 10GE, 25GE, 40GE, and 100GE port types, flexibly adapting to diversified network bandwidth requirements. They also support cloud management and implement cloud-managed network services throughout the full lifecycle from planning, deployment, monitoring, experience visibility, and fault rectification, all the way to network optimization, greatly simplifying network management.
By integrating the native wireless access controller (WAC) capability, a single CloudEngine S6730-H switch can manage a vast number of wireless access points (APs). The results are simplified network architecture, fewer required devices, and lowered networking costs. Free mobility, another key differentiator of CloudEngine S6730-H, enables consistent user experience no matter the user location or IP address, fully meeting enterprises’ demands for mobile offices.
CloudEngine S6730-H switches support VXLAN to implement network virtualization, achieving multi-purpose networks and multi-network convergence for greatly improved network capacity and utilization. As such, CloudEngine S6730-H switches are an ideal choice for building next-generation IoT converged networks in terms of cost, flexibility, and scalability.
The full series of CloudEngine S6730-H switches have built-in security probes to enable abnormal traffic detection, analysis of threats even in encrypted traffic, and network-wide threat detection. With such robust security features, CloudEngine S6730-H switches transform traditional passive security defense into proactive security protection, fully ensuring campus network security.
SKU: n/a₹377,600.00 - Switches
CloudEngine S5735-L
0 out of 5(0)Product Overview
CloudEngine S5735-L series switches are ideal for scenarios such as enterprise campus network access and gigabit to the desktop. Built on next-generation, high-performance hardware and the Versatile Routing Platform (VRP), CloudEngine S5735-L switches stand out with compelling features such as intelligent stack (iStack), flexible Ethernet networking, and diversified security control. They support multiple Layer 3 routing protocols and provide high performance and service processing capabilities.SKU: n/a₹29,500.00 - Switches
CloudEngine S6750-H36C
0 out of 5(0)Product Overview
CloudEngine S6750-H series 100GE switches are next-generation enterprise-class core switches that offer high performance, high reliability, cloud management, and intelligent operations and maintenance (O&M). They build on an industry-leading software and hardware platform and are purpose-built with security, IoT, and cloud in mind. With these traits, CloudEngine S6750-H can be widely used in enterprise campuses, colleges/universities and other scenarios.
CloudEngine S6750-H series 100GE switches offer 100GE port types, flexibly adapting to diversified network bandwidth requirements. They also support cloud management and implement cloud-managed network services throughout the full lifecycle from planning, deployment, monitoring, experience visibility, and fault rectification, all the way to network optimization, greatly simplifying network management.
CloudEngine S6750-H series 100GE switches support free mobility, enables consistent user experience no matter the user location or IP address, fully meeting enterprises’ demands for mobile offices.
CloudEngine S6750-H series 100GE switches support VXLAN to implement network virtualization, achieving multi-purpose networks and multi-network convergence for greatly improved network capacity and utilization. As such, CloudEngine S6750-H series 100GE switches are an ideal choice for building next-generation IoT converged networks in terms of cost, flexibility, and scalability.
SKU: n/a₹1,298,000.00 - Switches
GIGABIT ETHERNET FIBER SWITCH
0 out of 5(0)Product Overview
2-port 10/100/1000M TX +8-port 1000M FX (Un-mannaged)
This switch provides 2-port 10/100/1000M RJ45 and 8-port 1000M SFP fiber ports. Users may need to use different SFP modules, such as 1000Base-T, 1000Base-SX, 1000Base-LX. This 8 port fiber switch offers stable performance and excellent quality. It is ideal for a small optical ethernet and optical networks with specialist needs.
SKU: n/a₹5,310.00
- Switches
CloudEngine S5735-L24T4X
0 out of 5(0)Product Overview
CloudEngine S5735-L-V2 series switches are ideal for scenarios such as enterprise campus network access and gigabit to the
desktop. Built on next-generation, high-performance hardware and software platform, CloudEngine S5735-L-V2 switches stand
out with compelling features such as intelligent stack (iStack), flexible Ethernet networking, and diversified security control. They
support multiple Layer 3 routing protocols and provide high performance and service processing capabilities.SKU: n/a₹35,400.00
- 100G SFP Transceivers
100G-QSFP28-BIDI-LR-20
0 out of 5(0)Features:
- Lane signaling rate 106.25Gb/s with PAM4
- Up to 20km transmission on SMF
- EML Laser and PIN receiver
- 4×25.78Gb/s with NRZ electrical interface (CAUI-4)
- Support KP4 FEC inside the module
- High speed I/O electrical interface
- I2C interface with integrated Digital Diagnostic monitoring
- QSFP28 MSA package with simplex LC connector
- Single +3.3V power supply
- Power consumption <4W
- Compliant to SFF-8636&SFF-8679 standard
- Compliant to 100G Lambda MSA 100G-LR1 Optical Specifications
- Complies with EU Directive 2015/863/EU
- Operating case temperature: 0 to +70 °C
SKU: n/a₹159,300.00 - 100G SFP Transceivers
100G-QSFP28-BIDI-ZR-80
0 out of 5(0)Features:
- Supports 103.125Gb/s aggregate bit rate
- Built-in 4-channel Clock and Data Recovery (CDR) in TX and RX
- LAN WDM EML laser and PIN receiver with SOA
- Up to 80km reach for G.652 SMF
- Hot pluggable 38 pin electrical interface
- QSFP28 MSA compliant
- BIDI LC optical receptacle
- RoHS-10 compliant and lead-free
- Excellent EMI performance
- Single +3.3V power supply
- Maximum power consumption 5.5W
- Case operating temperature 0 ~ 70℃
SKU: n/a₹377,600.00 - 100G SFP Transceivers
100G-QSFP28-BIDI-ER-40
0 out of 5(0)Features:
Supports 100GBASE-ER1 BIDI
Lane signaling rate 106.25Gb/s with PAM4
Up to 40km transmission on SMF
EML Laser and APD receiver
4×25.78Gb/s with NRZ electrical interface (CAUI-4)
Support KP4 FEC inside the module
High speed I/O electrical interface
I2C interface with integrated Digital Diagnostic monitoring
QSFP28 MSA package with simplex LC connector
Single +3.3V power supply
Power consumption <4W
Operating case temperature: 0 to +70 °C
Compliant to 802.3cu, SFF-8636&SFF-8679 standard
Compliant to 100G Lambda MSA 100G-ER1 Optical Specifications
Complies with EU Directive 2015/863/EUSKU: n/a₹193,520.00 - Optical Fiber Identifier
Optical Fiber Identifier TnT-FI-10VL-OPM
0 out of 5(0)Introduction:
Optical Fiber Identifier is an important tool for optical maintenance, which is used for nondestructive fiber identification project. Meanwhile it also has Visual Fault Locator module with fault location function and power meter function.
Using the macro bending technology on line for nondestructive testing, It can measure the signal direction and power and avoid mis-operation resulting in interrupted lines.
Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Doesn’t damage optical fiber,without interrupting communications, and direct detection of 2.5mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper.SKU: n/a₹6,844.00
- Category
Products

Optical Line Terminal
Optical Network Terminal: Enabling high-speed internet at your fingertips.

Optical Network Terminal
Optical Network Terminal: Enabling high-speed internet at your fingertips.

Optical Transceivers
Optical transceivers enable high-speed data transmission over optical fibers.

Media Converter
Transforming formats, bridging worlds—Media Converter.

Adapter
Optical Network Terminal: Enabling high-speed internet at your fingertips.

Connector
Optical transceivers enable high-speed data transmission over optical fibers.

Power Meter
Optical Network Terminal: Enabling high-speed internet at your fingertips.

Climpping Tool
Optical Network Terminal: Enabling high-speed internet at your fingertips.
Solutions that minimize the cost & increase the Velocity
Solutions that minimize the cost & increase the Velocity
Solutions that minimize the cost & increase the Velocity
- TESTIMONIAL
TESTIMONIAL
- OUR CLIENTS
All Our Great Client
Insights and resources to help you drive your business fast forward



