Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – Pro’sKit Leo
Features
- Multi-Function Telephone Tool Crimps, Cuts, and Strips For Easy On-The-Job Tool Application.
- The Steel Frame Gives Long-Term Durability and Dependability.
- Provides Easier and Faster Operation.
- For RJ-45/11 Modular Connector Steel Frame.
₹483.00
Related products
- Accessories, Stripper, Crimping Tool & Cutter
Fiber Stripper – 8PK-326
Features
- Por’sKit 8PK-326 Fiber Optic Stripper features precise threestripping holes performs all common fiber stripping functionsand gurantee the accurately stripping without damage.
- Strips the 1.6-3.0mm fiber jacket down to the 600-900 micron buffer coating.
- Strips the 600-900 micron buffer coating down to the 250-micron coating.
- Strips the 50-micron cable down to the glass fiber without nicks or scratches.
SKU: n/a - Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – techNXT Gold
Features
• Portable Style With Perfect Shape.
• It Won’t damage the shelled-wire and works with high efficiency.
• The Mouth of the press-pliers is made of magnanic steel, which is hard and durable.
• While using press-pliers, just insert the cystal top into its position and press it.
• For 4,6,8 poies mudular connector.SKU: n/a - Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – TnT-5000
Features
- Cutting Modular Cable:- Place the single-bladed side of the tools cutter facing you and cut the modular cable to the desired legth. Make sure to cut the ends of the cord straight across, not diagonally.
- Stripping modular cable (Flat Cable):- 2a. Insert 4P/6P cable into the two-bladed side of the tool’s stripper unti it touches the stop guide.
- Insert 8P/cable into the two-bladed side of the tool’s stripper and let it extend a little past the lower cut blade.
- Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.
Stripping Round Cable - Insert the cable into the round stripping hole, and turn the crimper in a counter-clockwise direction and the cable clockwise at the same time.
- Remove the outer jacket, insert the stripped cable into the plug, and be sure the left wire at one end matches the right wire at the other end.
- Place a modular plug with cable into the tools holder. Be sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.
- The 4P holder is located on the back side of the tool.
SKU: n/a
