Accessories
Cable Binding Machine
Features
Fiber Type: Single Mode
Iron wire diameter: 0.8mm
Knot/battery: 1500 knots
Size: 80X48X11.5CM
Connector Type: Hybrid
Tying range: 30-60mm
Tying length/knot: 700-750mm
Charging time: 1.5 h
Related products
- Accessories, Stripper, Crimping Tool & Cutter
Fiberoptic Stripper – CFS-3
Features
- The three unique fiber-coating stripping pliers
- For stripping 125μm 250μm fiber coating
- 1.98mm top opening can be used to peel off the outer sheath pigtail
- V-shaped mouth edge of the clamp opening and 140μm on the optical fiber can be used for stripping 125μm 250μm cladding
- Manufacturer default goes without adjustment
- Will not damage the fiber
- All cutting surfaces have sophisticated mechanical tolerances to ensure a clean, smooth operation Ergonomically designed handle, comfortable grip • When not in use, the blade locked in the closed state
SKU: n/a - Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – TN-021C
Features
- FOR COND 8P8C LISE techNXT
- Cut the modular cable to the desired length. Make certain that the end are cut squarely, not diagonally.
- Insert flat cable between stripper blades. Squeeze handles, cable must be keep perpendicular and then pull from the tool.
- Stripping Round Cable
- Insert the cable into the round stripping hole and then turn the cable.
- Remove the outer jacket, insert the stripped cable into the plug and be sute the left wire at one and
matches the right wire at the other end. - Place modular plug with cable into the tools holder. Make sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.
SKU: n/a - Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – TnT-5000
Features
- Cutting Modular Cable:- Place the single-bladed side of the tools cutter facing you and cut the modular cable to the desired legth. Make sure to cut the ends of the cord straight across, not diagonally.
- Stripping modular cable (Flat Cable):- 2a. Insert 4P/6P cable into the two-bladed side of the tool’s stripper unti it touches the stop guide.
- Insert 8P/cable into the two-bladed side of the tool’s stripper and let it extend a little past the lower cut blade.
- Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.
Stripping Round Cable - Insert the cable into the round stripping hole, and turn the crimper in a counter-clockwise direction and the cable clockwise at the same time.
- Remove the outer jacket, insert the stripped cable into the plug, and be sure the left wire at one end matches the right wire at the other end.
- Place a modular plug with cable into the tools holder. Be sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.
- The 4P holder is located on the back side of the tool.
SKU: n/a - Accessories, Connecter
Fast Connector SC/PC/APC
Norden fast connectors are factory pre-polished, field-installable connectors that completely eliminate the need for hand polishing in the field. These fast connectors are compatible with 0.9mm tight buffer,2mm & 3mm drop cable. This connector during the installation process does not require any adhesive and curing process. It is possible to rework, so can be reduced the defect rate by worker’s connection error.
FEATURES
- Easy Assembly Process
- No Polish, No Epoxy Required
- Factory Polishing Eliminates Loss Concerns
SKU: n/a
