Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – TnT-5000
Features
- Cutting Modular Cable:- Place the single-bladed side of the tools cutter facing you and cut the modular cable to the desired legth. Make sure to cut the ends of the cord straight across, not diagonally.
- Stripping modular cable (Flat Cable):- 2a. Insert 4P/6P cable into the two-bladed side of the tool’s stripper unti it touches the stop guide.
- Insert 8P/cable into the two-bladed side of the tool’s stripper and let it extend a little past the lower cut blade.
- Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.
Stripping Round Cable - Insert the cable into the round stripping hole, and turn the crimper in a counter-clockwise direction and the cable clockwise at the same time.
- Remove the outer jacket, insert the stripped cable into the plug, and be sure the left wire at one end matches the right wire at the other end.
- Place a modular plug with cable into the tools holder. Be sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.
- The 4P holder is located on the back side of the tool.
Related products
- Accessories, Stripper, Crimping Tool & Cutter
Fiber Stripper – 8PK-326
Features
- Por’sKit 8PK-326 Fiber Optic Stripper features precise threestripping holes performs all common fiber stripping functionsand gurantee the accurately stripping without damage.
- Strips the 1.6-3.0mm fiber jacket down to the 600-900 micron buffer coating.
- Strips the 600-900 micron buffer coating down to the 250-micron coating.
- Strips the 50-micron cable down to the glass fiber without nicks or scratches.
SKU: n/a - Accessories, Optical Adapter
Adopters & Attenuators
All Kinds of Adopters & Attenuator Available
Adopters Sc-Apc Green Adopters Sc-pc Blue Adopters Fc Adopters LC Doble Adopters Lc Quatera Adopters lc Dual Multimode Adopters lc single Adopters LC APC dual-mode Adopters LC Aqua color Adopters LC dual Aqua color Adopters SC-FC METAL Adopters SC-FC Plastic Adapter SC MM dual Adopters ST Adopters SC-LC Metal SKU: n/a - Accessories, Stripper, Crimping Tool & Cutter
Crimping Tool – TnT-5001
Features
- Cutting Modular Cable:- Place the single-bladed side of the tools cutter facing you and cut the modular cable to the desired legth. Make sure to cut the ends of the cord straight across, not diagonally.
- Stripping modular cable (Flat Cable):- 2a. Insert 4P/6P cable into the two-bladed side of the tool’s stripper unti it touches the stop guide.
- Insert 8P/cable into the two-bladed side of the tool’s stripper and let it extend a little past the lower cut blade.
- Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.
Stripping Round Cable - Insert the cable into the round stripping hole, and turn the crimper in a counter-clockwise direction and the cable clockwise at the same time.
- Remove the outer jacket, insert the stripped cable into the plug, and be sure the left wire at one end matches the right wire at the other end.
- Place a modular plug with cable into the tools holder. Be sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.
- The 4P holder is located on the back side of the tool.
SKU: n/a - Accessories, Stripper, Crimping Tool & Cutter
Fiberoptic Stripper – CFS-2
Features
- Fiberoptic Stripper features precise two stripping holes perform all common fiber stripping functions and guarantee accurate stripping without damage.
- Strips the 1.6-3.0mm fiber jacket down to the 600-900 micron buffer coating.
- Strips the 600-900 micron buffer coating down to the 250-micron coating.
- Strips the 50-micron cable down to the glass fiber without nicks or scratches.
- For Stripping 125 Micron fiber with 250-micron buffer coating.
SKU: n/a
